Infrared sensor - IR sensor

The infrared sensor (IR sensor) is a light-sensitive optoelectronic component with a spectral sensitivity in infrared wavelength range (850 nm ... 50 µm).

A pyroelectric sensor made by InfraTec is applied in gas analysers, flame sensors, spectral analysis devices and in contact-free temperature measurement devices. These instruments measure the intensity and/or the spectral composition of thermal infrared radiation.

More information about infrared sensors

Infrared sensor from InfraTec

Therefore, the effectively used wavelength range of an infrared sensor is only between (2 and 14) µm, with few exceptions. InfraTec’s infrared sensors are equipped with a special absorbent black layer and can therefore be used as extensive, stable, long-term receivers for UV radiation (for instance 193 nm), or with a special coating also for THz radiation in the range from 100 µm to 1 mm.

An IR sensor for low- and high-temperature applications

Depending on the basic physical principle, an IR sensor can either be applied in a wide temperature range without cooling (so-called thermal infrared sensors) or have to be cooled or thermally stabilised in order to achieve high resolutions (semiconductor resistors or diodes). 

An InfraTec IR sensor is a thermal detector, which are ideally applied at temperatures of (-55 ... +105) °C. The lithium tantalate (LiTaO3) pyroelectric sensor element has a Curie temperature of 620 °C, which would allow for an even higher operating temperature. The temperature-limiting elements of the infrared detector are the infrared window and filter as well as the integrated, extremely noise- and stray-current-reduced preamplifier technology.

Contact

Branch office:

InfraTec infrared Ltd
Chesterfield, UK
workPhone:+44 1246 267562

Headquarters:

InfraTec GmbH
Infrarotsensorik und Messtechnik
Dresden, GERMANY
workPhone:+49 351 871-8625
Fax:+49 351 871-8727
sensor@InfraTec.de

InfraTec-TUEV-Seal